号数 ばね論文集42号(1997年)
ページ数 pp.45-54
種類 論文
論文名 線くせおよび線のフィード条件が成形コイルの形状に及ぼす影響
Title Effect of Initial Curvature and Torsion of Wires under Different Feeding Conditions on the Shape of Formed Coils
著者 山屋 憲・久納 孝彦・對馬 一憲
Author Ken YAMAYA・Takahiko KUNOH ・Kazunori TSUSHIMA
抄録 冷間成形されるコイルばねの加工精度に影響を及ぼす要因として線くせおよび線のフィード条件が知られているが,それらの要因と成形されるコイルの寸法や形状との因果関係は未だ明らかにされていない。本論文はこの関係の理論的かつ実験的な解明を試みたものであり,その主な成果を以下に示す。成形コイルの曲率およびれい率(単位長さ当りのねじれ角)は,線束面が水平面となす傾斜角に対しその三角関数の一次式で表される。特に,線束面を鉛直にして供給すると,線くせが成形コイルの曲率に大きく影響し,水平にして供給すると,成形コイルのれい率に大きく影響する。コイルと同じ巻方向の線くせをもつ線を巻けば線くせが生かされ,コイリングの際の加工量が少なくなる。線くせのない,真直な線を用いた場合,線のフィード条件が成形コイルの寸法と形状に及ぼす影響はほとんど認められない。フィードローラ加圧力が増大して線の直線化がすすむと,成形コイルの曲率およびれい率に及ぼす線くせの影響は減少する。
Abstract In this paper effects of initial curvature and torsion of wires and feeding conditions on the shape of formed coils are studied theoretically and experimentally. The main results are as follows;
Curvature and torsion of the formed coils varies proportionally to the trigonometoric function of the inclination angle of the wire bundle plane from horizontal position. Especially, the vertical setting of the plane influences the curvature directly and the horizontal setting has big influence on the torsion of coils. when the initial tensional direction of wires coincide with that of formed coil, combined effect will be expected. The effect of feeding conditions on shape of formed coils seems to be less when the initial curvature and torsion become minimal. As the compressive force of feed rollers increase, the wire in front end of coiling pin become straighter, which reduces the effects of initial curvature and torsion of wires on coils.
著者の所属 慶応義塾大学理工学部
Belonging Faculty of Science and Technology, KEIO University
Key Words Coil spring, Cold coiling, Coiling machine, Wire, Initial curvature, Initial torsion,Wire feeding conditions