号数 ばね論文集38号(1993年)
ページ数 pp.47−52
種類 論文
論文名 太物線材用回転曲げ疲労試験機の試作
Title Make a Trial Rotating-Bending Fatigue Tester for Thick Wires on a Experimental Basis
著者 綾田 倫彦1)・清水 正利2)
Author Michihiko AYADA1)・Masatoshi SHIMIZU2)
抄録  線径φ8mm以下の線の耐久性を評価するために、これまでは中村式回転曲げ疲労試験機がよく用いられている。φ8mm以上の太物線材用としては小野式回転曲げ疲労試験機が挙げられるが、特殊な形状の試験片を作製しなければならないことや試験片を取り付けたときの軸芯精度が厳しいことなどから汎用性の点で問題がある。
 そこで我々は汎用性に優れた中村式回転曲げ疲労試験機に準じて、4点曲げによるφ8〜10mmの太物線材用の回転曲げ疲労試験機を製作した。本試験機は、試験片加工をしないで線材のままで試験が可能なため従来の小野式回転曲げ疲労試験に比べて簡便性、迅速性の点で優れている。
 本論文では、この試験機の概要と適用例について取り上げる。
Abstract  In order to evaluate the fatigue strength of wires of φ8mm or less, Nakamura-type rotating-bending fatigue tester has been widely used. For thick wires of φ8mm or more, Ono-type rotating-bending fatigue tester has been widely used. However, it has problems in terms of usability because a test pieces of special shape should be made and the axis of rotation should be set with the extreme precision when the test piece is installed.
 Therefore, we have developed a rotating-bending fatigue tester of 4-point bending for thick wires of φ8〜φ10mm, consulting the good usability of Nakamura-type rotating-bending fatigue tester. This tester is superior to the conventional Ono-type rotating-bending fatigue tester in terms of simplicity and rapidity, because thick wires can be used as it is without any machining.
 In this paper, the outline of this tester and its applications are discussed.
著者の所属 1)株式会社日発グループ中央研究所 2)同左(現,日発販売株式会社)
Belonging 1) NHK SPRING R&D CENTER INC.
2) Same as left, Currently, NHK SALES CO., LTD.
Key Words