号数 ばね論文集36号(1991年)
ページ数 pp.47-53
種類 論文
論文名 ばね鋼におけるショットピーニング残留応力分布と疲労き裂伝播寿命の関係について
Title Relation between shot-peening residual stress distribution and fatigue crack propagation life in spring steel
著者 丹下 彰1)・阿久津 忠良1)・高村 典利2)
Author Akira TANGE 1)・Tadayoshi AKUTU 1)・ Noritoshi TAKAMURA 2)
抄録 ショートピーニングによる残留応力分布の疲労き裂伝播寿命への影響について、ばね鋼に関して研究した。
結果は以下のようにまとめられる。
(1)ばね鋼における微小き裂伝播開始条件を決定するために、我々はHaddadの整理法に硬さおよび力比依存性を考慮する方法を提案した。
(2)疲労き裂伝播寿命向上には、表面圧縮残留応力を高めることが非常に重要である。
(3)疲労き裂伝播寿命の大半は疲労き裂が表面から圧縮残留応力が最大となる位置にまで伝播する間に費やされる。
(4)内部の圧縮残留応力が最大となる位置は表面に近ければ近いほど、疲労き裂伝播寿命は向上する。
(5)本手法によって予測されるS-N曲線は、実際の回転曲げ疲労試験結果とよく対応している。
Abstract We performed the following study to examine the influence of the residual stress distribution by shot-peening on the fatigue crack propagation life. The results we obtained are as follows ; 
(1)To define the threshold conditions of small crack propagation in spring steels, we proposed a method which consists of applying the hardness and stress ratio dependency to Haddad's consolidation. 
(2)It is very important to raise the surface residual stress for improving the fatigue crack propagation life. 
(3)Most of the fatigue crack propagation life is spent while the crack propagates from the surface to the position where the compressive residual stress is maximum. 
(4)The nearer to the surface the position where the compressive residual stress is maximum, the longer fatigue crack propagation life is extended. 
(5)The predicted S-N curve by this method shows good correspondence with the actual results of the rotary bending fatigue tests.
著者の所属 1)(株)日発グループ中央研究所 2)日本発条株式会社 精密ばね事業本部
Belonging 1)NHK Spring R & D Center Inc. 2)Precision Spring Division NHK Spring Co., Ltd.
Key Words